DIM-L-1.4459
Welding wire DIM L-1.4459
Description:
Material no.: 1.4459
DIN 8556: SG X 2 25 13 3
EN ISO 14343-A: G/W Z 25 13 3
EN 12072: G/W 23 12 2 L
AWS A5.9: ~ER 309 L Mo
Non-rusting CrNiMo welding filler material
Characteristics:
High-alloyed wire electrode for plating, various steels and austenite-ferrite connections up to 300° C operating
temperature. For hard-weldable steels. Black and white connections. Welding of buffer layers/welding of sheet metal. High polishable.
Materials:
1.4301 - X 5 CrNi 18-10 (X 5 CrNi 18-9),
1.4306 - X 2 CrNi 19-11 (X 2 CrNi 18-9),
1.4308 - GX 6 CrNi 18-9,
1.4311 - X 2 CrNiN 18-10,
1.4401 - X 5 CrNiMo 17-12-2 (X 5 CrNiMo 18-10),
1.4404 - X 2 CrNiMo 17-13-2 (X 2 CrNiMo 18-10),
1.4406 - X 2 CrNiMoN 17-12-2,
1.4408 - GX 6 CrNiMo 18-10,
1.4435 - X 2 CrNiMo 18-14-3 (X 2 CrNiMo 18-12),
1.4436 - X 5 CrNiMo 17-13-3 (X 5 CrNiMo 18-12),
1.4541 - X 6 CrNiTi 18-10,
1.4550 - X 6 CrNiNb 18-10 (X 10 CrNiNb 18-9),
1.4552 - GX 5 CrNiNb 18-9,
1.4571 - X 6 CrNiMoTi 17-12-2,
1.4573 - X 10 CrNiMoTi 18-12,
1.4580 - GX 10 CrNiMoNb 18-10,
1.4581 - GX 5 CrNiMoNb 18-10,
1.4583 - X 10 CrNiMoNb 18-12,
1.4948 - X 6 CrNi 18-11,
S31653, AiSi 316 L, 316 Ti, 316 Cb
1.4057 - X 17 CrNi 16-2
All among each other or with un- or low alloyed steels.
Analysis in %:
|
C |
Si |
Mn |
Cr |
Ni |
Mo |
N | Fe |
|
0.02 |
0.4 |
1.5 |
22.0 |
14.5 |
2.5 |
0.23 | Remainder |
Mechanical properties of pure weld metal:
| Yield strength Re | 500 N/mm² |
| Tensile strength Rm MPa | 700 N/mm² |
| Elongati on (A)(Lo=5do) | 30 % |
| Impact energy (Av) | 60 J |
| Hardness of pure weld metal | approx. 220 HB |
| Coolness after hot/cold hardening | approx. 38 HRC |
- Australia
- Germany
- Denmark
- Switzerland
- Austria
- Argentina
Welding wire DIM L-1.4459
Description:
Material no.: 1.4459
DIN 8556: SG X 2 25 13 3
EN ISO 14343-A: G/W Z 25 13 3
EN 12072: G/W 23 12 2 L
AWS A5.9: ~ER 309 L Mo
Non-rusting CrNiMo welding filler material
Characteristics:
High-alloyed wire electrode for plating, various steels and austenite-ferrite connections up to 300° C operating
temperature. For hard-weldable steels. Black and white connections. Welding of buffer layers/welding of sheet metal. High polishable.
Materials:
1.4301 - X 5 CrNi 18-10 (X 5 CrNi 18-9),
1.4306 - X 2 CrNi 19-11 (X 2 CrNi 18-9),
1.4308 - GX 6 CrNi 18-9,
1.4311 - X 2 CrNiN 18-10,
1.4401 - X 5 CrNiMo 17-12-2 (X 5 CrNiMo 18-10),
1.4404 - X 2 CrNiMo 17-13-2 (X 2 CrNiMo 18-10),
1.4406 - X 2 CrNiMoN 17-12-2,
1.4408 - GX 6 CrNiMo 18-10,
1.4435 - X 2 CrNiMo 18-14-3 (X 2 CrNiMo 18-12),
1.4436 - X 5 CrNiMo 17-13-3 (X 5 CrNiMo 18-12),
1.4541 - X 6 CrNiTi 18-10,
1.4550 - X 6 CrNiNb 18-10 (X 10 CrNiNb 18-9),
1.4552 - GX 5 CrNiNb 18-9,
1.4571 - X 6 CrNiMoTi 17-12-2,
1.4573 - X 10 CrNiMoTi 18-12,
1.4580 - GX 10 CrNiMoNb 18-10,
1.4581 - GX 5 CrNiMoNb 18-10,
1.4583 - X 10 CrNiMoNb 18-12,
1.4948 - X 6 CrNi 18-11,
S31653, AiSi 316 L, 316 Ti, 316 Cb
1.4057 - X 17 CrNi 16-2
All among each other or with un- or low alloyed steels.
Analysis in %:
|
C |
Si |
Mn |
Cr |
Ni |
Mo |
N | Fe |
|
0.02 |
0.4 |
1.5 |
22.0 |
14.5 |
2.5 |
0.23 | Remainder |
Mechanical properties of pure weld metal:
| Yield strength Re | 500 N/mm² |
| Tensile strength Rm MPa | 700 N/mm² |
| Elongati on (A)(Lo=5do) | 30 % |
| Impact energy (Av) | 60 J |
| Hardness of pure weld metal | approx. 220 HB |
| Coolness after hot/cold hardening | approx. 38 HRC |
- Australia
- Germany
- Denmark
- Switzerland
- Austria
- Argentina
