DIM-L-1.4842
Welding wire DIM L-1.4842
Description:
Material no.: 1.4842
DIN 8556: SG X 12 CrNi 25 20
EN ISO 14343-A: G 25 20 Mn
AWS A5.9: ER310 (mod.)
AISl: 310S
Highly alloyed, heat-resistant
Characteristics:
Solid wire electrode for uniform, heat-resistant rolled-, forged- and cast steels, e.g. annealings, heat treatments,
boiler constructions, petroleum industry, ceramic industry.
Fully austenitic weld metal. Preferred in the case of attacks of oxidizing, nitrogen-containing and oxygen-deficient
gases. Joint welds on heat-resistant Cr-Si-Al steels exposed to sulfur-containing gases.
Scaling resistance up to +1200° C. Cold resistant to -196° C. The temperature range between +650-900° C is to be
avoided because of the risk of embrittlement.
Materials:
Austenitic:
1.4841 X15CrNiSi25-21, 1.4845 X8CrNi25-21, 1.4828 X15CrNiSi20-12,
1.4840 GX15CrNi25-20, 1.4846 X40CrNi25-21, 1.4826 GX40CrNiSi22-10,
1.4832 / 37/48
Ferritic-perlitic:
1.4713 X10CrAlSi7, 1.4724 X10CrAlSi13, 1.4742X10CrAlSi18, 1.4762X10CrAlSi25,
1.4710 GX30CrSi7, 1.4740 GX40CrSi17
AISI 305, 310, 314, ASTM A297 HF, A297 HJ
Analysis in %:
C |
Si |
Mn |
Cr |
Ni |
0.13 |
0.9 |
3.2 |
24.6 |
20.5 |
Mechanical properties of pure weld metal:
pure weld metal | u* |
Tensile strength Rm MPa | 320 (≥ 550) |
Yield strengthRp0.2 MPa | 400 (≥ 350) |
Elongation A (L0=5d0) % | 38 (≥ 20) |
Impact energy ISO-V KV J +20°C | -196°C | 95 | (≥32) |
u* untreated, welding condition – protection gas Ar+2.5% CO2
- Australia
- Germany
- Denmark
- Switzerland
- Austria
- Argentina
Welding wire DIM L-1.4842
Description:
Material no.: 1.4842
DIN 8556: SG X 12 CrNi 25 20
EN ISO 14343-A: G 25 20 Mn
AWS A5.9: ER310 (mod.)
AISl: 310S
Highly alloyed, heat-resistant
Characteristics:
Solid wire electrode for uniform, heat-resistant rolled-, forged- and cast steels, e.g. annealings, heat treatments,
boiler constructions, petroleum industry, ceramic industry.
Fully austenitic weld metal. Preferred in the case of attacks of oxidizing, nitrogen-containing and oxygen-deficient
gases. Joint welds on heat-resistant Cr-Si-Al steels exposed to sulfur-containing gases.
Scaling resistance up to +1200° C. Cold resistant to -196° C. The temperature range between +650-900° C is to be
avoided because of the risk of embrittlement.
Materials:
Austenitic:
1.4841 X15CrNiSi25-21, 1.4845 X8CrNi25-21, 1.4828 X15CrNiSi20-12,
1.4840 GX15CrNi25-20, 1.4846 X40CrNi25-21, 1.4826 GX40CrNiSi22-10,
1.4832 / 37/48
Ferritic-perlitic:
1.4713 X10CrAlSi7, 1.4724 X10CrAlSi13, 1.4742X10CrAlSi18, 1.4762X10CrAlSi25,
1.4710 GX30CrSi7, 1.4740 GX40CrSi17
AISI 305, 310, 314, ASTM A297 HF, A297 HJ
Analysis in %:
C |
Si |
Mn |
Cr |
Ni |
0.13 |
0.9 |
3.2 |
24.6 |
20.5 |
Mechanical properties of pure weld metal:
pure weld metal | u* |
Tensile strength Rm MPa | 320 (≥ 550) |
Yield strengthRp0.2 MPa | 400 (≥ 350) |
Elongation A (L0=5d0) % | 38 (≥ 20) |
Impact energy ISO-V KV J +20°C | -196°C | 95 | (≥32) |
u* untreated, welding condition – protection gas Ar+2.5% CO2
- Australia
- Germany
- Denmark
- Switzerland
- Austria
- Argentina