LAWI-10-M
Welding wire LAWI 10 M
Description:
Martensitic Cr-Mn Laser welding wire with anticorrosion properties. Polishable, erodable, nitrable, etchable and heat treatable. Hardenable up to the 2. layer. For repairs of plastic, blowing- and injection moulds, also for compression moulding dies.
Hardness 1-st layer approx. 48-56 HRC, depending on the mixture.
Recommend for material no. 1.2343, 1.2344, 1.2082, 1.2083, 1.2367, 1.2606 and similar steels.
Analysis in %:
C |
Al |
Cr |
Fe |
Mn |
Mo |
Si |
V |
Su% |
0.35 |
0.05 |
5.90 |
Rest |
0.60 |
1.30 |
0.8 |
0.70 |
0.40 |
The technical results are dependent on the extent of mingling to the basic materials
and also a indication of the process engineering.
- Australia
- Germany
- Switzerland
- Austria
- Argentina
Welding wire LAWI 10 M
Description:
Martensitic Cr-Mn Laser welding wire with anticorrosion properties. Polishable, erodable, nitrable, etchable and heat treatable. Hardenable up to the 2. layer. For repairs of plastic, blowing- and injection moulds, also for compression moulding dies.
Hardness 1-st layer approx. 48-56 HRC, depending on the mixture.
Recommend for material no. 1.2343, 1.2344, 1.2082, 1.2083, 1.2367, 1.2606 and similar steels.
Analysis in %:
C |
Al |
Cr |
Fe |
Mn |
Mo |
Si |
V |
Su% |
0.35 |
0.05 |
5.90 |
Rest |
0.60 |
1.30 |
0.8 |
0.70 |
0.40 |
The technical results are dependent on the extent of mingling to the basic materials
and also a indication of the process engineering.
- Australia
- Germany
- Switzerland
- Austria
- Argentina