LAWI-25
Welding wire LAWI 25
Description:
Cr-Mo-Mn-Ti filler metal with low c-content. Because of the extreme wear resistant properties and also of high toughness suitable for repair or production of hot working steels, as plastic-, pressure casting- and pressure tools. High abrasive, mechanical and thermal strength.
Hardness 1-st layer approx. 42 - 50 HRC.
Suitable for materials no.: 1.2080, 1.2083, 1.2343, 1.2344 and similar steels.
Analysis in %:
|
C |
Cr |
Fe |
Mn |
Mo |
Si |
Ti |
Su% |
|
0.20 |
5.50 |
Rest |
0.80 |
3.5 |
0.4 |
0.6 |
0.35 |
The technical results are dependent on the extent of mingling to the basic materials and also an indication of the process engineering.
- Australia
- Germany
- Denmark
- Switzerland
- Austria
- Argentina
Welding wire LAWI 25
Description:
Cr-Mo-Mn-Ti filler metal with low c-content. Because of the extreme wear resistant properties and also of high toughness suitable for repair or production of hot working steels, as plastic-, pressure casting- and pressure tools. High abrasive, mechanical and thermal strength.
Hardness 1-st layer approx. 42 - 50 HRC.
Suitable for materials no.: 1.2080, 1.2083, 1.2343, 1.2344 and similar steels.
Analysis in %:
|
C |
Cr |
Fe |
Mn |
Mo |
Si |
Ti |
Su% |
|
0.20 |
5.50 |
Rest |
0.80 |
3.5 |
0.4 |
0.6 |
0.35 |
The technical results are dependent on the extent of mingling to the basic materials and also an indication of the process engineering.
- Australia
- Germany
- Denmark
- Switzerland
- Austria
- Argentina
