LAWI-26
Welding wire LAWI 26
Description:
Martensitic chromium filler metal with elements for structure stabilization.
The welding deposit is Polishable, erodable, nitrable, etchable and heat treatable. Cannot be chromium-plated. Resistant to rust and wear. Suitable for GRP plastic- Injection moulding and blow moulding.
Hardness 1-st layer approx. 48-54 HRC can differ, depending on the extent of mingling.
Hardenable up to approx. 60 HRC.
Analysis in %:
|
C |
Cr |
Fe |
Mn |
Mo |
Ni |
Si |
V |
|
0.20 |
12.0 |
Rest |
0.50 |
1.00 |
<1,0 |
0.5 |
0.35 |
The technical results are dependent on the extent of mingling to the basic materials
and also an indication of the process engineering.
- Australia
- Germany
- Denmark
- Switzerland
- Austria
- Argentina
Welding wire LAWI 26
Description:
Martensitic chromium filler metal with elements for structure stabilization.
The welding deposit is Polishable, erodable, nitrable, etchable and heat treatable. Cannot be chromium-plated. Resistant to rust and wear. Suitable for GRP plastic- Injection moulding and blow moulding.
Hardness 1-st layer approx. 48-54 HRC can differ, depending on the extent of mingling.
Hardenable up to approx. 60 HRC.
Analysis in %:
|
C |
Cr |
Fe |
Mn |
Mo |
Ni |
Si |
V |
|
0.20 |
12.0 |
Rest |
0.50 |
1.00 |
<1,0 |
0.5 |
0.35 |
The technical results are dependent on the extent of mingling to the basic materials
and also an indication of the process engineering.
- Australia
- Germany
- Denmark
- Switzerland
- Austria
- Argentina
