DIM-L-1.4576
Welding wire DIM L-1.4576
Description:
Material no.: 1.4576
DIN 8556: SG X 5 CrNiMoNb 19 12
EN 12072: G 19 12 3 Nb/W19 12 3 Nb
EN 14343-A: G/W 19 12 3 Nb
ASW/ASME SFA- A5.9: ER 318 (Si)
B.S.2901 part 2: (318 S96)
Characteristics:
DIM L-1.4576 is a stainless Cr-Ni welding wire for joining and surface welding on stabilized, similar, chemically
resistant CrNiMo steels in chemical apparatus and equipment construction for operating temperatures from
-120° C to 400° C. Also suitable for connection welding of any stainless steel (also different alloys) without special
requirements of the apparatus construction. Recommended for medical devices.
Materials:
For raw materials mat.-no.: 1.4401 / 1.4404/08 / 1.4435/36 / 1.4409- (G-X2 CrNiMo 19-112)
1.4420 / 1.4571/73 / 1.4580/81/83
UNS S31653 / AlSi 361L / 316Ti / 316Cb
Analysis in %:
C |
Si |
Mn |
Cr |
Ni |
Mo |
Nb | Fe |
0.03 |
0.4 |
1.5 |
19 |
11.5 |
2.8 |
0.55 | Remainder |
Mechanical properties of pure weld metal:
pure weld metal | |
Tensile strength Rm MPa | 680 |
Yield strengthRp0.2 MPa | 460 |
Elongation A 5 (%) | 35 |
Impact energy KV J | 100 |
- Australia
- Germany
- Switzerland
- Austria
- Argentina
Welding wire DIM L-1.4576
Description:
Material no.: 1.4576
DIN 8556: SG X 5 CrNiMoNb 19 12
EN 12072: G 19 12 3 Nb/W19 12 3 Nb
EN 14343-A: G/W 19 12 3 Nb
ASW/ASME SFA- A5.9: ER 318 (Si)
B.S.2901 part 2: (318 S96)
Characteristics:
DIM L-1.4576 is a stainless Cr-Ni welding wire for joining and surface welding on stabilized, similar, chemically
resistant CrNiMo steels in chemical apparatus and equipment construction for operating temperatures from
-120° C to 400° C. Also suitable for connection welding of any stainless steel (also different alloys) without special
requirements of the apparatus construction. Recommended for medical devices.
Materials:
For raw materials mat.-no.: 1.4401 / 1.4404/08 / 1.4435/36 / 1.4409- (G-X2 CrNiMo 19-112)
1.4420 / 1.4571/73 / 1.4580/81/83
UNS S31653 / AlSi 361L / 316Ti / 316Cb
Analysis in %:
C |
Si |
Mn |
Cr |
Ni |
Mo |
Nb | Fe |
0.03 |
0.4 |
1.5 |
19 |
11.5 |
2.8 |
0.55 | Remainder |
Mechanical properties of pure weld metal:
pure weld metal | |
Tensile strength Rm MPa | 680 |
Yield strengthRp0.2 MPa | 460 |
Elongation A 5 (%) | 35 |
Impact energy KV J | 100 |
- Australia
- Germany
- Switzerland
- Austria
- Argentina