LAWI-22
Welding wire LAWI 22
Description:
Martensitic Cr-Mn Laser welding wire with anticorrosion properties. Polishable, erodable, nitrable, etchable and heat treatable. Hardenable up to the 2. layer. For repairs of plastic, blowing- and injection moulds, also for compression moulding dies.
Hardness 1-st layer approx. 48-56 HRC, depending on the mixture.
Recommend for material no. 1.2343, 1.2344, 1.2082, 1.2083, 1.2367, 1.2606 and similar steels.
Analysis in %:
|
C |
Cr |
Fe |
Mn |
Mo |
Ni |
Si |
Nb |
|
0,05 |
19,0 |
2,1 |
3,0 |
1,0 |
Rest |
0,30 |
3,0 |
The technical results are dependent on the extent of mingling to the basic materials and also an indication of the process engineering.
- Australia
- Germany
- Switzerland
- Austria
- Argentina
Welding wire LAWI 22
Description:
Martensitic Cr-Mn Laser welding wire with anticorrosion properties. Polishable, erodable, nitrable, etchable and heat treatable. Hardenable up to the 2. layer. For repairs of plastic, blowing- and injection moulds, also for compression moulding dies.
Hardness 1-st layer approx. 48-56 HRC, depending on the mixture.
Recommend for material no. 1.2343, 1.2344, 1.2082, 1.2083, 1.2367, 1.2606 and similar steels.
Analysis in %:
|
C |
Cr |
Fe |
Mn |
Mo |
Ni |
Si |
Nb |
|
0,05 |
19,0 |
2,1 |
3,0 |
1,0 |
Rest |
0,30 |
3,0 |
The technical results are dependent on the extent of mingling to the basic materials and also an indication of the process engineering.
- Australia
- Germany
- Switzerland
- Austria
- Argentina
